CNC Verticals: Super-Speed, Drill/Tap/Mill Centre

DM-2

DM-2

Product Overview

Drill/Mill Centre; 711 x 406 x 394 mm, 40 taper, 15 hp vector drive, 15,000 rpm, 61 m/min rapids, high-speed 18+1 side-mount tool changer, power-failure detection module, 1 GB program memory, 15" colour LCD monitor, USB port, Ethernet interface, memory lock keyswitch, rigid tapping and 170 L flood-coolant system. Anchor kit highly recommended for installation.


    Specifications

    DM-2 - Compare to:
    DM-2
    TRAVELSS.A.E.METRIC
    X Axis28 " 711 mm
    Y Axis16 " 406 mm
    Z Axis15.5 " 394 mm
    TABLES.A.E.METRIC
    Length34 " 864 mm
    Width15 " 381 mm
    T-Slot Width5/8 " 16 mm
    T-Slot Centre Distance4.92 " 125.0 mm
    Number of Std T-Slots3  3
    Max Weight on Table (evenly distributed)250 lb 113 kg
    SPINDLES.A.E.METRIC
    Max Rating15 hp 11.2 kW
    Max Speed15,000 rpm 15000 rpm
    Max Torque46 ft-lb @ 1700 rpm 62 Nm @ 1700 rpm
    Drive SystemInline Direct Drive  Inline Direct Drive
    TaperBT40 or CT40  BT40 or CT40
    Bearing LubricationAir/Oil  Air/Oil
    CoolingAir  Air
    TAPPINGS.A.E.METRIC
    Max Tapping Speed5000 rpm 5000 rpm
    Max Tap Size (aluminum)1/2 x 13  M12 x 1.75 mm
    FEEDRATESS.A.E.METRIC
    Rapids on X2400 in/min 61.0 m/min
    Rapids on Y2400 in/min 61.0 m/min
    Rapids on Z2400 in/min 61.0 m/min
    Max Cutting1200 in/min 30.5 m/min
    AXIS MOTORSS.A.E.METRIC
    Max Thrust X2550 lb 11343 N
    Max Thrust Y2550 lb 11343 N
    Max Thrust Z4200 lb 18683 N
    TOOL CHANGERS.A.E.METRIC
    TypeSMTC  SMTC
    Capacity18+1  18+1
    Max Tool Diameter2.5 " 64 mm
    Max Tool Diameter (adjacent empty)2.5 " 64 mm
    Max Tool Length7.0 " 178 mm
    Chip-to-Chip (avg)1.6 sec 1.6 sec
    GENERALS.A.E.METRIC
    Air Required4 scfm, 100 psi 113 L/min, 6.9 bar
    Coolant Capacity45 gal 170 L