CNC Verticals: Super-Speed, Drill/Tap/Mill Centre

DT-2

DT-2

Product Overview

Drill/Tap Centre; 711 x 406 x 394 mm, BT30 taper, 15 hp vector drive, 15,000 rpm, 61 m/min rapids, high-speed 20+1 side-mount tool changer, power-failure detection module, 1 GB program memory, 15" colour LCD monitor, USB port, Ethernet interface, memory lock keyswitch, rigid tapping and 170 L flood-coolant system. Anchor kit highly recommended for installation.


Specifications

DT-2 - Compare to:
DT-2
TRAVELSS.A.E.METRIC
X Axis28 " 711 mm
Y Axis16 " 406 mm
Z Axis15.5 " 394 mm
TABLES.A.E.METRIC
Length34 " 864 mm
Width15 " 381 mm
T-Slot Width5/8 " 16 mm
T-Slot Center Distance4.92 " 125.0 mm
Number of Std T-Slots3  3
Max Weight on Table (evenly distributed)250 lb 113 kg
SPINDLES.A.E.METRIC
Max Rating15 hp 11.2 kW
Max Speed15,000 rpm 15000 rpm
Max Torque46 ft-lb @ 1700 rpm 62 Nm @ 1700 rpm
Drive SystemInline Direct Drive  Inline Direct Drive
TaperBT/30  BT/30
Bearing LubricationAir/Oil  Air/Oil
CoolingAir  Air
TAPPINGS.A.E.METRIC
Max Tapping Speed5000 rpm 5000 rpm
Max Tap Size (aluminum)1/2 x 13  M12 x 1.75
SPINDLE (OPT)S.A.E.METRIC
Max Rating15 hp 11.2 kW
Max Speed20,000 rpm 20000 rpm
Max Torque16 ft-lb @ 2800 rpm 21.7 Nm @ 2800 rpm
Drive SystemInline Direct Drive   Inline Direct Drive
FEEDRATESS.A.E.METRIC
Rapids on X2400 in/min 61.0 m/min
Rapids on Y2400 in/min 61.0 m/min
Rapids on Z2400 in/min 61.0 m/min
Max Cutting1200 in/min 30.5 m/min
AXIS MOTORSS.A.E.METRIC
Max Thrust X2550 lb 11343 N
Max Thrust Y2550 lb 11343 N
Max Thrust Z4200 lb 18683 N
TOOL CHANGERS.A.E.METRIC
TypeSMTC  SMTC
Capacity20+1  20+1
Max Tool Diameter2.0 " 51 mm
Max Tool Diameter (adjacent empty)2.0 " 51 mm
Max Tool Length7.0 " 178 mm
Chip-to-Chip (avg)1.6 sec 1.6 sec
GENERALS.A.E.METRIC
Air Required4 scfm, 100 psi 113 L/min, 6.9 bar
Coolant Capacity45 gal 170 L