VM-3

40

TAPER

3

AXIS

12k

RPM

30+1

TOOL CAPACITY

The Haas VM Series machines are high-performance VMCs that provide the accuracy, rigidity, and thermal stability required for mould making, tool & die work, and other high-precision industries. Each machine features a generous work cube, a multi-fixturing table, and a 12,000-rpm inline direct-drive spindle. Standard features include the Haas high-speed control with full look-ahead, a side-mount tool changer, a programmable coolant nozzle, an automatic air gun, and much more.

  • Inline direct-drive spindle
  • Side-mount tool changer
  • Multi-fixturing table
  • High-speed machining software
  • Made in the USA

VM Series high-performance VMCs – Vertical Mould Making Machine; 1016 x 660 x 635 mm, 40 taper, 30 hp vector drive, 12,000 rpm, direct-drive, side-mount tool changer, 18.0 m/min rapids, automatic chip auger, remote jog handle, automatic air gun, high-speed machining, Ethernet interface, macros, coordinate rotation & scaling, programmable coolant nozzle, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, memory lock keyswitch, rigid tapping and 208 litre flood coolant system.

 

Other models in the VM Series: VM-2 and VM-6

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.