Haas TR-160Y Compact Trunnion Table
Five-axis machining is becoming more common today as a means to reduce set-up time and increase accuracy for complex parts. But investing in a 5-axis machine tool can be prohibitively expensive, especially for smaller shops.
The new TR160Y dual-axis trunnion rotary table from Haas Automation puts 5-axis capabilities well within reach of the average job shop, and its compact size provides greater mounting flexibility.
The TR160Y is designed to mount in the Y direction (front to back on the table) of a mid-size VMC. At less than 635 mm wide and only 482 mm deep, the TR160Y easily fits on one end of the machine’s table, freeing up the remainder for additional fixtures or vices. The TR160Y has a 160 mm T-slot platter, and will swing parts up to190 mm diameter. The maximum platter capacity is 37 kg. The trunnion provides ±120 degrees of tilt and 360 degrees of rotation for full simultaneous 5-axis motion, or to position parts to almost any angle for machining. Yet, like all Haas rotary tables, it can easily be removed when not needed.
Powerful brushless servomotors provide 150 ft-lb of spindle torque on both axes of the TR160Y. Brake torque is 300 ft-lb and 100 ft-lb respectively, and speeds are 130 deg/sec on the rotary axis and 100 deg/sec on the tilt axis. The trunnion’s precision-ground platter of heat-treated 4140 alloy steel has six standard T-slots equally spaced at 60 degrees for easy fixturing. Three servo-control configurations are available, making the TR160Y easy to interface to almost any machine.
Call 01603 760539 for further details on the Haas range of CNC machine tools or to discuss your requirements with a Haas expert.
Click here for Haas TR-160Y Tilting Table Specifications
Coldon Engineering Limited
“The Haas service is great. They always have the spares we need in stock, don’t charge the earth for them, and as long as we call their service department before 4:30pm they’ll get the parts to us first thing next morning. If we need a service engineer to visit they’ll be here the same day or within 24hrs. I fully recommend Haas.”
“We’re able to call the applications department for advice and they’ve always managed to provide us with the solutions we need, whether over the telephone or in person. Haas have given us some CNC control simulators, so our students can test their programming skills without the danger of crashing one of our real Haas machines. The training that Haas offers has proved invaluable both to students and staff.”
BBR Engineering Limited
Titan Motorsport Limited
Woodbridge Engineering Limited
Headline Filters Limited
“In all cases, every possible part that could be required is shipped in for the Engineer. Any parts not required are collected the next day & are never installed unless absolutely required. This honest philosophy, together with realistically priced spare parts ans highly competent staff make the upkeep of even our older machines viable. I look forward to many more years dealing with Haas.”