CNC Machine telephoneHomeAbout Us CNC Verticals CNC Horizontals CNC Turning Centres Rotary Tables and Indexers Diamond Cut Wheel Lathes Service and Support Education Used Machines Exhibitions Request a Brochure Finance Customer Success Stories Tips and Tricks Recruitment Contact Us

Haas Magazine

Haas TR-200Y Compact Trunnion TableHaas CNC machine tools, CNC mills and CNC lathes

Five-axis machining is becoming more common today as a means to reduce set-up time and increase accuracy for complex parts. But investing in a 5-axis machine tool can be prohibitively expensive, especially for smaller shops.

The new TR-200Y dual-axis trunnion rotary table from Haas Automation puts 5-axis capabilities well within reach of the average job shop, and its compact size provides greater mounting flexibility.

The TR-200Y is designed to mount in the Y direction (front to back on the table) of a mid-size VMC. At less than 635 mm wide and only 482 mm deep, the TR-200Y easily fits on one end of the machine’s table, freeing up the remainder for additional fixtures or vices. The TR-200Y has a 200 mm T-slot platter, and will swing parts up to 205 mm diameter. The maximum platter capacity is 37 kg. The trunnion provides ±120 degrees of tilt and 360 degrees of rotation for full simultaneous 5-axis motion, or to position parts to almost any angle for machining. Yet, like all Haas rotary tables, it can easily be removed when not needed.

Powerful brushless servomotors provide 150 ft-lb of spindle torque on both axes of the TR-200Y. Brake torque is 300 ft-lb and 100 ft-lb respectively, and speeds are 130 deg/sec on the rotary axis and 100 deg/sec on the tilt axis. The trunnion’s precision-ground platter of heat-treated 4140 alloy steel has six standard T-slots equally spaced at 60 degrees for easy fixturing. Three servo-control configurations are available, making the TR-200Y easy to interface to almost any machine.

Call 01603 760539 for further details on the Haas range of CNC machine tools or to discuss your requirements with a Haas expert.

Click here for Haas TR-200Y Trunnion Specifications

Coldon Engineering Limited
“The Haas service is great. They always have the spares we need in stock, don’t charge the earth for them, and as long as we call their service department before 4:30pm they’ll get the parts to us first thing next morning. If we need a service engineer to visit they’ll be here the same day or within 24hrs. I fully recommend Haas.”    

Greenwich University
“The service that the University has received from Haas has been exemplary, from the initial decision making stage, through the sales and ordering process, installation and after sales support. 

“We’re able to call the applications department for advice and they’ve always managed to provide us with the solutions we need, whether over the telephone or in person. Haas have given us some CNC control simulators, so our students can test their programming skills without the danger of crashing one of our real Haas machines. The training that Haas offers has proved invaluable both to students and staff.”    

BBR Engineering Limited
“The service we’ve had from Haas has been excellent. Our VF-3 vertical developed a problem, which we reported at 11 o’clock that morning. By 2 o’clock we’d confirmed with the Haas service department that we needed a new spindle and that a technician would be with us the next day. He arrived at 8 o’clock the next morning, with a new spindle, which was fitted and aligned that day. The machine has been faultless ever since.”    

Titan Motorsport Limited
“I’m a big fan of Haas and currently have over 20 of their CNC machines. We’ve got a service contract, so our machines are frequently serviced and are very reliable. If we ever have a problem, the Haas service engineers are with us within 24hrs. For example, the other day, one of our machines was showing a low oil pressure warning. The service engineer arrived early the next day and fitted a new pump.”    

Woodbridge Engineering Limited
“We’ve always had great service and support from Haas. To give an example; one of our operators knocked the spindle on our SL-30 lathe out of alignment. The Haas service engineer was here the following day, with all the parts he needed and fixed the machine.”    

Headline Filters Limited
“Over the years I’ve always been very pleased with the consistently high level of service we get from Haas. On the occasions when our older machines develop a fault, a simple telephone call to Haas reception is all that’s required to get in touch with the Service Department & then to an Engineer. The Engineers are excellent at diagnosing faults & in many cases the problem can be dealt with over the phone in order to keep our production going.

“In all cases, every possible part that could be required is shipped in for the Engineer. Any parts not required are collected the next day & are never installed unless absolutely required. This honest philosophy, together with realistically priced spare parts ans highly competent staff make the upkeep of even our older machines viable. I look forward to many more years dealing with Haas.”      

Member of the British Safety Council

Haas CNC MTA membership lathes and mills

Member of the Manufacturing Technologies Association

© 2017 Haas Automation Ltd

Website Terms & Conditions

CNC Verticals VMC & Mills | CNC Horizontals HMC | CNC Turning Centres & Lathes
CNC Rotaries & Indexers | Haas USA