TRT100

SPINDLES

100 mm

COLLET SIZE

16 ft-lb

MAX TORQUE

1000 °/sec

MAX SPEED

100 mm (3.9″) High-Speed Tilting 2-Axis Rotary Table, with indexing up to 1000 deg/sec. Requires a Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis operation. Requires software version M18.24B or later. Not available for stand-alone operation.

TRT100 - Compare to

TRT100
Platter	S.A.E.	METRIC
Diameter	3.94 "	100 mm
Max Weight on Platter	15 lb	6.8 kg
Part Swing Max	8.44 "	214 mm
Hole Pattern	3 6-bolt patterns	3 6-bolt patterns
Spindle - A (TILT)	S.A.E.	METRIC
Travel	±120 °	±120 °
Max Speed	0.001 to 1000 °/sec	0.001 to 1000 °/sec
Max Torque	35 ft-lb	47.5 Nm
Gear Ratio	8:1	08:01:00
Accuracy (±)	90 arc-sec	90 arc-sec
Repeatability (±)	30 arc-sec	30 arc-sec
Brake Torque @ 100 psi/6.9 bar	100 ft-lb	136 Nm
Spindle – B (ROTARY)	S.A.E.	METRIC
Travel	360 °	360 °
Max Speed	0.001 to 1000 °/sec	0.001 to 1000 °/sec
Max Torque	16 ft-lb	21.7 Nm
Gear Ratio	7:1	07:01:00
Accuracy (±)	45 arc-sec	45 arc-sec
Repeatability (±)	30 arc-sec	30 arc-sec
Brake Torque @ 100 psi/6.9 bar	50 ft-lb	68 Nm
Indexing – A (TILT)	S.A.E.	METRIC
Resolution	0.001 °	0.001 °
Indexing – B (ROTARY)	S.A.E.	METRIC
Resolution	0.001 °	0.001 °
GENERALS	S.A.E.	METRIC
Air Pressure Max	150 psi	10.3 bar
Weight	S.A.E.	METRIC
Table	170 lb	77.1 kg

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR ROTARIES IN ACTION

Haas VMCs and Rotary Tables - A Perfect Combination

Take a quick look at just a few examples of how our machine and rotary combinations can help you get your difficult multi-sided parts done better.

Don’t Fear 5-Axis - Parts 1, 2 and 3

Senior applications engineer John Nelson explains why 5-axis machining is much simpler than it has ever been before, and why any shop can be a 3+2 or 5-axis shop.

Learn how the Haas software feature DWO and TCPC (Dynamic Work Offsets and Tool Centre Point Control) makes 4th and 5th-axis work simpler than ever.

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

Haas Rotary QuickChange System and Block Fixtures

We’ve touched on the QuickChange and Block accessories available for Haas rotary tables in several of our other videos. This video focuses specifically on those accessories. So if you’re looking to get more productive with your rotary part fixturing, be sure to watch this!