DM-1

40

TAPER

3

AXIS

10k

RPM

18+1

TOOL CAPACITY

Take a Bite Out of Cycle Times – DM-1 high-speed machine


The DM-1 high-speed machine provides the perfect combination of speed and power to reduce cycle times.

The DM-1 is a compact high-speed machine identical in construction and specifications to the DT-1, but with the substitution of a Haas 40-taper inline spindle and an 18+1 tool changer. The machine’s high acceleration rates, fast axis speeds, and short tool change times make the DM-1 an attractive high-productivity machining centre.

Equally important, the DM-1 allows shops to use their existing 40-taper tooling and enjoy the benefits of a larger spindle. Moreover, it has a lean-style, compact footprint that makes very efficient use of valuable shop floor space.

  • Powerful 40-taper inline direct-drive spindle
  • High-productivity machining centre with a compact footprint
  • Made in the USA

DM-1 high-speed machine; 508 x 406 x 394 mm, 40 taper, 15 hp vector drive, 10,000 rpm (12K & 15K opt.), 61 m/min rapids, high-speed 18+1 side-mount tool changer, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, Ethernet interface, memory lock keyswitch, rigid tapping and 170 L flood-coolant system. Anchor kit highly recommended for installation.

Introducing the DM-1


See how the DM-1 high-speed machine high acceleration rates and fast tool-change times – combined with the ability to use a shop’s existing 40-taper tools – make it a valuable addition for job shops and large manufacturers alike.

Link to video

Link to DM/DT Series

Wireless Intuitive Probing System


Drastically reduce setup times on your high-speed machine

Automate your high-speed machine’s setup process with the <a href=”https://www.haas.co.uk/wips/”>Haas Wireless Intuitive Probing System</a> (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, and optical machine interface. Furthermore, powerful software that guides the operator through the job setup process with intuitive, easy-to-use templates. WIPS allows you to quickly and easily define work offset coordinates. Additionally, set tool length offsets, and perform in-process inspection.

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.