GR-712

40

TAPER

3

AXIS

8.1k

RPM

10

TOOL CAPACITY

Large-Platform CNC Gantry Machines for Big Jobs


Haas CNC gantry routers and mills easily handle large sheets, or can machine small parts by the thousand

Ready for Your Large-Scale Tasks

The Haas CNC gantry router has the power to cut aluminium and other metals, as well as the speed to cut plastics and other light materials. These machines easily handle large sheets, or can machine small parts by the thousand.

The Haas GR Series gantry routers have the power to cut aluminium and other metals, as well as the speed to cut plastics and other light materials. These machines easily handle large sheets of material, or can machine small parts by the thousand. The rigid steel construction of the GR Series provides a very stable cutting platform, and a 1″ thick aluminium table is standard. A traveling guard protects the operator from chips and coolant, and keeps the workspace clean.

  • Rigid-steel construction
  • Traveling guard for chip and coolant containment
  • 1″ thick aluminum table
  • Made in the USA

CNC gantry router; 3683 x 2159 x 279 mm, 40 taper, 15 hp vector drive, 8100 rpm, 10-pocket automatic tool changer, power-failure detection module, 1 GB program memory, memory lock keyswitch, 15″ colour LCD monitor, Ethernet interface and USB port.


HaasBuilt – GR-510


Take a closer look at how your GR-510 CNC gantry router is built and assembled from the ground up, straight from our factory in Oxnard, California!

Link to video

Link to GR-520

Display Pictures and Videos


With M130, you can display setup sheets, tool lists, work instructions, and even videos all within your program. No more taping work instructions to the machine, or handwriting notes telling your operator how to load or inspect a part; put it all in your NC program!

Link to video

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.