VF-3SS

40

TAPER

3

AXIS

12k

RPM

30+1

TOOL CAPACITY

The best-value, high-performance high-speed VMCs available today.


A Wide Range of Sizes and Features to Fit Any Shop’s Needs – High-Performance, High-Speed VMCs

Haas offers a wide range of High-Speed VMCs to match any size and production requirement. Regardless of your needs, there’s a VF just right to meet the demands of your machine shop.

Every VF Series machine provides outstanding features at an excellent price. By the same token, there are a wide range of available options to customise your machine to your exact needs. Not to mention all Haas machines are designed and built in California, USA.

The Haas high-performance Super-Speed vertical machining centres provide the high spindle speeds, fast rapids, and quick tool changes necessary for high-volume production and reduced cycle times. Each SS machine features a 12,000-rpm, inline direct-drive spindle, an ultra-fast side-mount tool changer, and high-speed rapids on all axes.

The VF-3SS offers more X- and Z-axis travel than the VF-2SS and VF-2SSYT.

  • High-power, direct-drive spindle
  • Customisable to your needs
  • Our flagship model
  • Made in the USA

VF-3SS Super-Speed Vertical Machining Centre; 1016 x 508 x 635 mm, 40 taper, 30 hp vector drive, 12,000 rpm, direct-drive, high-speed 30+1 side-mount tool changer, 35.6 m/min rapids, power-failure detection module, 1 GB program memory, 15″ colour LCD monitor, USB port, Ethernet, memory lock keyswitch, rigid tapping and 208 litre flood coolant system.

VF-2SS at Work • High-Performance, High-Speed VMC


Watch as we rip through some aluminium and efficiently machine all 6 sides of a part. This video features a VF-2SS together with an HRC-210 rotary table. The High-Speed VMCs spindle has the speed to really push a small endmill through aluminium at extremely high feedrates, and the power to remove lots of material with a shell mill.

Link to video

Wireless Intuitive Probing System


Drastically reduce setup times on your high-speed machine

Automate your high-speed machine’s setup process with the Haas Wireless Intuitive Probing System (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, together with an optical machine interface. Furthermore, powerful software that guides the operator through the job setup process with intuitive, easy-to-use templates. WIPS allows you to quickly and easily define work offset coordinates. Additionally, set tool length offsets, and perform in-process inspection.

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210. 

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1. 

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.