TM-1P

TAPER

AXIS

RPM

TOOL CAPACITY

Large Travels. Big Capabilities. Small Prices.

The CNC Toolroom Mill Series is the true definition of value. They provide full CNC capabilities at affordable prices.

The TM-P Series CNC Toolroom Mills are affordable and easy to use. Equally important, they offer the precision control of the Haas CNC system. They use standard 40-taper tooling and are very easy to learn and operate. Moreover, they are the perfect option for colleges and companies transitioning to CNC. Additionally, for anyone looking for a large-travel machine on a budget.

The TM-P models include a 10-pocket automatic tool changer as well as, a faster spindle, and higher rapids.

Operates on single- or three-phase power
Conversational programming system
User-friendly Haas control
Affordable full CNC capabilities
HaasConnect remote monitoring
Made in the USA

TM-1P CNC Toolroom Mill with Tool Changer; 762 x 406 x 406 mm, 40 taper, 7.5 hp vector drive, 6000 rpm, full enclosure, 10-station automatic tool changer, Visual Programming System, power-failure detection module, 1 GB program memory, memory lock keyswitch, 15″ colour LCD monitor and USB port, Ethernet interface and 20-gallon (76 litre) flood coolant system.

The Haas TM-1 Toolroom Mill

Haas Toolroom Mills are the true definition of value and provide full CNC capabilities. Additionally, they are available with 4th- and 5th-axis functionality. Furthermore, they offer the perfect combination of value, reliability, and performance for any shop.

Link to video

Link to CNC Toolroom Mill Series

Wireless Intuitive Probing System

Drastically reduce setup times on your Mini Mill

Automate your CNC Toolroom Mill’s setup process with the Haas Wireless Intuitive Probing System (WIPS). WIPS is a complete probing package that includes the spindle probe, tool setting probe, and optical machine interface. Furthermore, powerful software guides the operator through the job setup process with intuitive, easy-to-use templates. As a result, WIPS allows you to quickly and easily define work offset coordinates. Additionally, set your machine’s tool length offsets, and perform an in-process inspection.

TM-1P - Compare to

TM-1P
TRAVELS	S.A.E.	METRIC
X Axis	30 "	762 mm
Y Axis	16 "	406 mm
Z Axis	16 "	406 mm
Spindle Nose to Table (~ max)	20 "	508 mm
Spindle Nose to Table (~ min)	4 "	102 mm
TABLE	S.A.E.	METRIC
Length	47.75 "	1213 mm
Width	10.5 "	267 mm
T-Slot Width	5/8 "	16 mm
T-Slot Center Distance	4.00 "	101.6 mm
Number of Std T-Slots	3	3
Max Weight on Table (evenly distributed)	1000 lb	454 kg
SPINDLE	S.A.E.	METRIC
Max Rating	7.5 hp	5.6 kW
Max Speed	6000 rpm	6000 rpm
Max Torque	33 ft-lb @ 1200 rpm	45 Nm @1200 rpm
Drive System	Direct Speed Belt Drive	Direct Speed Belt Drive
Taper	BT or CT 40	BT or CT 40
Bearing Lubrication	Grease packed	Grease packed
Cooling	Air Cooled	Air Cooled
FEEDRATES	S.A.E.	METRIC
Rapids on X	400 in/min	10.2 m/min
Rapids on Y	400 in/min	10.2 m/min
Rapids on Z	400 in/min	10.2 m/min
Max Cutting	400 in/min	10.2 m/min
AXIS MOTORS	S.A.E.	METRIC
Max Thrust X	2000 lb	8896 N
Max Thrust Y	2000 lb	8896 N Max
Thrust Z	2000 lb	8896 N
TOOL CHANGER	S.A.E.	METRIC
Type	Carousel	Carousel
Capacity	10	10
Max Tool Diameter (full)	3.5 "	89 mm
Max Tool Weight	12 lb	5.4 kg
Tool-to-Tool (avg)	5.7 sec	5.7 sec
Chip-to-Chip (avg)	6.5 sec	6.5 sec
GENERALS	S.A.E.	METRIC
Air Required	4 scfm, 100 psi	113 L/min, 6.9 bar

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR VERTICALS IN ACTION

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

VF-4 and TR200Y - Cutting Demo

Watch as our VF-4 mill joins forces with our TR200Y 5-Axis trunnion rotary table to put features on 5 sides of this block.

Check out our VF-4 mill here: haas.co.uk/machines/vf-4/

And check out the TR200Y rotary table here: haas.co.uk/rotaries/tr200y/

How We Build VMCs Today

Back in the late 1980s we started building our first VMC, the VF-1.

Today, our process is finely tuned and extremely efficient for a machine that is still hand built to a great extent. Take a look at how we build the same VF that may be sitting on your shop floor not too long from now.

Display Pictures and Videos on Your Haas Control Using M130

Mark shows off the powerful new Haas M130 Media Display feature. By commanding an M130, you can display setup sheets, tool lists, work instructions, and even videos – all within your program.