HA5C4

SPINDLES

COLLET SIZE

25 ft-lb

MAX TORQUE

200 °/sec

MAX SPEED

Quad-Spindle Servo 5C Heads. Requires Haas mill with 4th axis drive for full 4th-axis operation, or a rotary control box for stand-alone operation. This unit has no collet closing capability as standard. Requires a Haas mill with software version 18.00 or later.

HA5C4 - Compare to

HA5C4
Spindle	S.A.E.	METRIC
Number	4	4
Max Speed	0.001 to 200 °/sec	0.001 to 200 °/sec
Max Torque	25 ft-lb	34 Nm
Nose Thread	2 3/16 - 10 "
Runout Max	0.0004 "	0.010 mm
Backlash	50 arc-sec	50 arc-sec
Center Height	5.875 ± 0.002 "	149.23 ± 0.05 mm
Gear Ratio	60:1	60:1
Collet size	std 5C 1/64 - 1 1/16 "	std 5C 0.4 - 27 mm
Indexing	S.A.E.	METRIC
Max Rotation/Step	999.999 °	999.999 °
Resolution	0.001 °	0.001 °
Accuracy (±)	60 arc-sec	60 arc-sec
Repeatability	10 arc-sec	10 arc-sec
Worm Gear Dia	2.8 "	71 mm
GENERALS	S.A.E.	METRIC
Power Requirement	115 VAC ±5% @ 15 A	115 VAC ±5% @ 15 A
Air Pressure Max	150 psi	10.3 bar
Operating Temp (max ambient)	100 °F	38 °C
Duty Cycle (w/o tailstock)	75 % @ full speed	75 % @ full speed
Weight	S.A.E.	METRIC
Rotary Head	225 lb	102.1 kg
Brushless Control – 1-Axis	14.2 lb	6.4 kg

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR ROTARIES IN ACTION

Haas VMCs and Rotary Tables - A Perfect Combination

Take a quick look at just a few examples of how our machine and rotary combinations can help you get your difficult multi-sided parts done better.

Don’t Fear 5-Axis - Parts 1, 2 and 3

Senior applications engineer John Nelson explains why 5-axis machining is much simpler than it has ever been before, and why any shop can be a 3+2 or 5-axis shop.

Learn how the Haas software feature DWO and TCPC (Dynamic Work Offsets and Tool Centre Point Control) makes 4th and 5th-axis work simpler than ever.

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

Haas Rotary QuickChange System and Block Fixtures

We’ve touched on the QuickChange and Block accessories available for Haas rotary tables in several of our other videos. This video focuses specifically on those accessories. So if you’re looking to get more productive with your rotary part fixturing, be sure to watch this!