HRT1000

SPINDLES

1000 mm

COLLET SIZE

2712 Nm

MAX TORQUE

35 °/sec

MAX SPEED

1,000 mm (39.37″) Servo Rotary Table. Requires Haas mill with 4th-axis drive for full 4th-axis operation, or a rotary control box for stand-alone operation. Requires a Haas mill with software version 18.00 or later.

HRT1000 - Compare to

HRT1000
Platter	S.A.E.	METRIC
Diameter	39.37 "	1000 mm
Number of Std T-Slots	8 @ 45º	8 @ 45º
Spindle	S.A.E.	METRIC
Max Speed	0.001 to 35 °/sec	0.001 to 35 °/sec
Max Torque	2000 ft-lb	2712 Nm
Runout Max	0.0015 "	0.038 mm
Backlash	30 arc-sec	30 arc-sec
Center Height	23.750 ± 0.001 "	603.25 ± 0.03 mm
Gear Ratio	150:1	150:1
Timing	2.5:1	2.5:1
Brake Torque @ 100 psi/6.9 bar	14000 ft-lb	18981 Nm
Indexing	S.A.E.	METRIC
Max Rotation/Step	999.999 °	999.999 °
Resolution	0.001 °	0.001 °
Accuracy (±)	15 arc-sec	15 arc-sec
Repeatability	10 arc-sec	10 arc-sec
Worm Gear Dia	30.6"	777 mm
GENERALS	S.A.E.	METRIC
Power Requirement	115 ± 5% VAC @ 15 A	115 ± 5% VAC @ 15 A
Air Pressure Max	150 psi	10.3 bar
Operating Temp (max ambient)	100 °F	38 °C
Duty Cycle full/low speed	50/100 %	50/100 %
Weight	S.A.E.	METRIC
Brushless Control	N/A	N/A
Table	N/A	N/A

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR ROTARIES IN ACTION

Haas VMCs and Rotary Tables - A Perfect Combination

Take a quick look at just a few examples of how our machine and rotary combinations can help you get your difficult multi-sided parts done better.

Don’t Fear 5-Axis - Parts 1, 2 and 3

Senior applications engineer John Nelson explains why 5-axis machining is much simpler than it has ever been before, and why any shop can be a 3+2 or 5-axis shop.

Learn how the Haas software feature DWO and TCPC (Dynamic Work Offsets and Tool Centre Point Control) makes 4th and 5th-axis work simpler than ever.

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

Haas Rotary QuickChange System and Block Fixtures

We’ve touched on the QuickChange and Block accessories available for Haas rotary tables in several of our other videos. This video focuses specifically on those accessories. So if you’re looking to get more productive with your rotary part fixturing, be sure to watch this!