TR310

SPINDLES

310 mm

COLLET SIZE

300 ft-lb

MAX TORQUE

50 °/sec

MAX SPEED

310 mm (12.2″) Tilting 2-Axis Trunnion Rotary Table, with scale feedback on the A (tilting) axis. Requires Haas mill with 4th-and 5th-axis drives for true 4th- and 5th-axis operation. Scale feedback functional only on Haas mills with software version 18.xx or later. Scale feedback does not function with rotary control box. Requires a Haas mill with software version 18.00 or later.

TR310 - Compare to

TR310
Platter	S.A.E.	METRIC
Platter Diameter	12.2 "	310 mm
Max Weight on Platter	500 lb	227 kg
Part Swing Max	31 "	787 mm
Number of Std T-Slots	6@ 60°	6@ 60°
Spindle - A (TILT)	S.A.E.	METRIC
Max Speed	0.001 to 50 °/sec	0.001 to 50 °/sec
Max Torque	300 ft-lb	407 Nm
Backlash	30 arc-sec	30 arc-sec
Gear Ratio	72:1	72:1
Timing	3:1	03:01:00
Brake Torque @ 100 psi/6.9 bar	1000 ft-lb	1356 Nm
Spindle – B (ROTARY)	S.A.E.	METRIC
Max Speed	0.001 to 50 °/sec	0.001 to 50 °/sec
Max Torque	300 ft-lb	407 Nm
Runout Max	0.001 "	0.025 mm
Backlash	30 arc-sec	30 arc-sec
Pilot Bore Dia. (through)	3.250 (+0.0005, -0) "	82.55 (+0.013, -0) mm
Gear Ratio	72:1	72:1
Timing	3:1	03:01:00
Brake Torque @ 100 psi/6.9 bar	500 ft-lb	678 Nm
Indexing – A (TILT)	S.A.E.	METRIC
Max Rotation/Step	120 °	120 °
Resolution	0.001 °	0.001 °
Accuracy (±)	15 arc-sec	15 arc-sec
Repeatability	10 arc-sec	10 arc-sec
Indexing – B (ROTARY)	S.A.E.	METRIC
Max Rotation/Step	999.999 °	999.999 °
Resolution	0.001 °	0.001 °
Accuracy (±)	15 arc-sec	15 arc-sec
Repeatability	10 arc-sec	10 arc-sec
GENERALS	S.A.E.	METRIC
Air Pressure Max	150 psi	10.3 bar
Operating Temp (max ambient)	100 °F	38 °C
Duty Cycle full/low speed	50/100 %	50/100 %
Power Required – 1-Axis Control	115 VAC ±10% @ 15 A	115 VAC ±10% @ 15 A
Weight	S.A.E.	METRIC
Table	1720 lb	780 kg
Brushless Control – 1-Axis	14.2 lb	6.4 kg

Brochure

N/A

Manual

Rotary Table Fit Chart

SEE OUR ROTARIES IN ACTION

Haas VMCs and Rotary Tables - A Perfect Combination

Take a quick look at just a few examples of how our machine and rotary combinations can help you get your difficult multi-sided parts done better.

Don’t Fear 5-Axis - Parts 1, 2 and 3

Senior applications engineer John Nelson explains why 5-axis machining is much simpler than it has ever been before, and why any shop can be a 3+2 or 5-axis shop.

Learn how the Haas software feature DWO and TCPC (Dynamic Work Offsets and Tool Centre Point Control) makes 4th and 5th-axis work simpler than ever.

Haas VF-2SS & HRC210 Demo

This demo was designed to show off the higher spindle speed and rapids of the VF-2SS and the quickness of the HRC210.

You can also see in-process probing for part location and feature inspection using the Haas WIPS system.

Haas Rotary QuickChange System and Block Fixtures

We’ve touched on the QuickChange and Block accessories available for Haas rotary tables in several of our other videos. This video focuses specifically on those accessories. So if you’re looking to get more productive with your rotary part fixturing, be sure to watch this!