• Delivery and installation – no hidden costs
• On-site training to get you up and running
• On-going support from Haas Engineering
• Six-month labour warranty.
We are constantly refreshing our stock of used Haas CNC machines, pre-owned and ex-demo machines. Receive an email when machines you’re interested in arrive, by filling the form below.
Let us know your interest in pre-owned, ex-demo and used Haas CNC machines, and we’ll tell you as soon as your choice is available.
We often have a selection of pre-owned, ex-demo and used Haas CNC machines, including CNC vertical (VMC) and CNC horizontal (HMC) machining centres available, ex-stock. These used CNC machines will be in great condition and will have been checked by our Engineering Department.
Please call us on 01603 760539 or email enquiries@haas.co.uk to discuss available used and ex-demo CNC machinery, or if you would like to consider part exchanging your old CNC milling machine for a new Haas Vertical (VMC).
Call us for available used Haas CNC lathes and CNC turning centres available. Our pre-owned and ex-demonstration CNC machines will be in great condition and will have been looked over by our Engineering Department.
To discuss available used and ex-demo CNC machines please call us on 01603 760539 or email enquiries@haas.co.uk.
Get in touch if you would like to consider part exchanging your old CNC lathe for a new Haas CNC turning centre.
We often have a selection of pre-owned and ex-demo Haas CNC vertical and horizontal machining centres, lathes, 5-axis machines and CNC rotaries available. Our used CNC machines will be in great condition and will have been checked by our Engineering Department.
The machines sell very quickly, so register interest here and we’ll get in touch as soon as a suitable machine is available.
Please call us on 01603 760539 or email enquiries@haas.co.uk to discuss available used and ex-demo CNC machinery, or if you would like to consider part exchanging your old CNC milling machine for a new Haas machine.
When you invest in a used Haas CNC machine from us, you’ll benefit in many ways.
We know the history of the pre-owned machines we buy back, and will only purchase machines that are in great condition.
You’ll get peace of mind with our six-month labour warranty, and of course, on-going service and support from our award winning Engineering Department.
Haas Financial Services can offer you tailor-made packages for your purchase of a Haas used CNC machine.
N.B. Images representative only. Photos of actual machines used where possible.
For Example: When a rotary fits with alternative fixturing, it may fit in that particular Haas mill, but will require a sub-plate or alternate T-slot for proper positioning. We have labeled this particular rotary and mill combination with a yellow caution
You can design and build your own sub-plate using the dimensions of your Haas mill and the dimensions of the rotary you'd like to use on that mill. Product dimensions are available for every machine and rotary on this website.
Single-Head Rotary Tables and Indexers are usually mounted to the right side of the table, with the rotary facing the centre of the machine. This is the basic setup we used to determine the fit of your rotary product.
Image shown for mounting example purposes only. Your actual rotary and mill appearance may differ.
Trunnion Tables, T5Cs, and TRTs are usually mounted in the centre (or slightly off-centre) of the mill table. If you are using probing on the mill, be aware of the interference with larger tools, especially during tool changes.
NOTE: Trunnion units present interference issues with the swing of the unit relative to the machine column and spindle head.
Image shown for mounting example purposes only. Your actual rotary and mill appearance may differ.
Multi-Head Rotary Tables and Indexers are usually mounted toward the back of the table, with the indexer heads or platter facing forward. To mount a multi-head rotary in a different orientation, you must use alternative fixturing.
Image shown for mounting example purposes only. Your actual rotary and mill appearance may differ.
Important Information:
4-axis machines cannot use dual-axis rotaries.
Some options may affect mounting (EC-1600 4th-Axis Table, Low-Profile Tables, Table Spacers, Column Risers, etc.
Tool Changers: SMTCs and umbrella tool changers both present interference issues, plan appropriately.